[Kflog-user] KFLog is fully ported to Qt4 now ;-)

[Stephan Danner]

Hello,
so, I'm tested the connection with my LX20 and... no Logger found :-(
Details: Debian wheezy (testing)
Notbook with seriell/USB adapter pl2303
demsg output:
[   97.124048] usb 3-1: new full speed USB device using uhci_hcd and 
address 2
[   97.282140] usb 3-1: New USB device found, idVendor=067b, idProduct=2303
[   97.282151] usb 3-1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[   97.282161] usb 3-1: Product: USB-Serial Controller
[   97.282168] usb 3-1: Manufacturer: Prolific Technology Inc.
[   97.282420] usb 3-1: configuration #1 chosen from 1 choice
[   97.424205] usbcore: registered new interface driver usbserial
[   97.424907] USB Serial support registered for generic
[   97.425618] usbcore: registered new interface driver usbserial_generic
[   97.425626] usbserial: USB Serial Driver core
[   97.442720] USB Serial support registered for pl2303
[   97.443400] pl2303 3-1:1.0: pl2303 converter detected
[   97.455470] usb 3-1: pl2303 converter now attached to ttyUSB0
[   97.455518] usbcore: registered new interface driver pl2303
[   97.455525] pl2303: Prolific PL2303 USB to serial adaptor driver

/dev/ttyUSB0 exists

kflog settings: Type Filser
		Port ttyUSB0
		Tranfer speed auto (also tested 4800, 9600, 19200
  		changed to the same speed at the LX20) Logger in transfer mode 
...Timeout 0..9
output at the terminal:
......
RecorderDialog::__openLib:  "libkfrfil.so"
No tasks planned ...
RecorderDialog::__openLib:  "libkfrfil.so"
OK, Library is already opened.
"No logger found!"
RecorderDialog::__openLib:  "libkfrfil.so"
OK, Library is already opened.
"No logger found!"
RecorderDialog::__openLib:  "libkfrfil.so"
OK, Library is already opened.
"No logger found!"
......

sorry that I could not test it with an real seriell port and I hope to 
help you with all the outputs.

Greetings
Stephan



Am 22.06.2011 12:44, schrieb Ehmke Eggert:
> Hello,
>
> I did the initial implementation of the LX20 interface. If any problems occour I will have a look into it. Our LX20 is deposited at our airfield, but if some testing must be done I can get it.
>
> -cu
> Eggert
>
> ----- ursprüngliche Nachricht ---------
>
> Subject: Re: [Kflog-user] KFLog is fully ported to Qt4 now ;-)
> Date: Mi 22 Jun 2011 10:40:34 CEST
> From: flieger-axel at web.de
> To: Hendrik Hoeth<hendrik.hoeth at cern.ch>
>
> 11/6/22 Hendrik Hoeth<hendrik.hoeth at cern.ch>:
>> Thus spake Stephan Danner (stephan.danner at gmx.de):
>>
>>> This evening I would test the connection with my Logger "Filser
>>> LX20-2000" and will report it.
>>
>> I recently tried it with a Colibri (uses the Filser protocol), a
>> Volkslogger and a Cambridge, and it worked fine. So I don't expect any
>> bad surprises.
>
> Be careful, I had to change a lot of QString stuff. Some old methods
> do not more exist in Qt4 and were replaced by other ones.
>
> br Axel
> _______________________________________________
> Kflog-user mailing list
> Kflog-user at kflog.org
> http://kflog.org/mailman/listinfo/kflog-user
>
>
> ---- ursprüngliche Nachricht Ende ----
> _______________________________________________
> Kflog-user mailing list
> Kflog-user at kflog.org
> http://kflog.org/mailman/listinfo/kflog-user